Introduction - NEC Storage M100 Series User Manual

Introduction

Thank you for purchasing NEC's product.
This document is intended for users who have ability to build server systems and configure networks. The
following systems are supported:
 Supported connection servers and operating systems:

For details about Windows and Linux NEC Storage program products, see NEC Storage
Software NEC Storage Manager User's Manual, NEC Storage Software NEC Storage
PathManager User's Manual (Windows version), and NEC Storage Software NEC Storage
PathManager for Linux User's Manual that come with the disk array unit.
 Supported configurations: Storage Area Network (SAN) configurations and Direct Attached Storage (DAS)
configurations including a recommended configuration shown in
Configuration.
Others: FC switches, network switches, and modems are not supported. They must be set up by

maintenance personnel.
This document is intended for use in a Windows or Linux environment.
For use in other OS environments, NEC Storage disk array system must be set up by maintenance service
provider. Please contact your maintenance service provider.
This document provides a general setup method of NEC Storage disk array system.
Before you start the setup, make sure to have products whose license sheets are shipped together with the
system and the license sheets ready.
Release 6.0
Figure 1: Example of Recommended
19