Figure H-18: Chap Authentication Tab In Iscsi Initiator Properties Screen - NEC Storage M100 Series User Manual

User Guide
CHAP Parameter Settings
If CHAP authentication will not be used, this step is not necessary.
For description of CHAP authentication, refer to
Information on Application Servers Registered with iSNS
1. Click the CHAP Authentication tab in the iSCSI Initiator Properties screen.
 The default CHAP parameters are shown under the CHAP Authentication tab.
 To change these CHAP parameters, click the Configure button.

Figure H-18: CHAP Authentication Tab in iSCSI Initiator Properties Screen

Release 6.0
Appendix H How to Set/Check Application Server (VMware) (iSCSI)
Appendix N: "Retrieve Initiator
415
Server".