Overview - NEC Storage M100 Series User Manual

User Guide

6.1 Overview

To set FC connection first in a disk array configured for both FC and iSCSI connections, see
"Initializing a Disk Array (FC)"
To set iSCSI connection first, perform the procedure in this chapter and then see
a Disk Array (FC)"
To initialize a disk array configured for FC connection, see
Array (FC)"
The initialization consists of:
1. Initializing the disk array by using the initialization wizard
Use the initialization wizard to make the basic settings of disk array.
For details about the procedure, see
2. Setting by using iSCSI Setup Tool
Use the iSCSI Setup Tool to make the setting required for the application server.
For details about the procedure, see
3. Binding pool
Bind a pool in the disk array.
For details about the procedure, see
4. Binding hot spare
Bind hot spare. This step is not required unless a hot spare is bound.
For details about the procedure, see
5. Binding logical disk
Bind logical disks.
For details about the procedure, see
6. Assigning the logical disks to application servers
Assign the logical disk to the application servers.
For details about the procedure,
7. Checking connection from the application servers
Check that the application servers to which the logical disk has been assigned can access the disk
array.
For details about the procedure, see
Release 6.0
to make the setting and then perform the procedure in this chapter.
to make setting.
.
Section 6.2.1: "Initialization
Section 6.2.2: "iSCSI Setup
Section 6.2.3: "Binding a
Section 6.2.4: "Binding a Hot
Section 6.2.5: "Binding Logical
Section 6.2.6: "Assigning Logical
Section 6.3: "Checking Connection from Application
Chapter 6 Initializing a Disk Array (iSCSI)
169
Chapter 5, "Initializing
Chapter 5, "Initializing a Disk
Wizard".
Tool".
Pool".
Spare".
Disk".
Disk".
Chapter 5,
Server".