Figure 1-13: Led Display - Disk Array Enclosure Adapter; Table 1-10: Status Display Led; Table 1-11: Disk Port Status - NEC Storage M100 Series User Manual

User Guide
1.2.3.4 Adapter (ADP)
(1) Ready
LED
Green
Not lit
Flashing
Flashing
Flashing
Flashing
Not lit
-
Disk port
(4) Link LED (LNK) (Green)
(5) Fault LED (FLT) (Orange)
Release 6.0

Figure 1-13: LED Display - Disk Array Enclosure Adapter

Table 1-10: Status Display LED

(2) Fault LED (3) ID LED
Orange Blue
Not lit -
Not lit -
Flashing in a
-
cycle of 0.5
second
Flashing in a -
cycle of 1
second
Lit -
Lit -
- Lit

Table 1-11: Disk Port Status

Status
Not connected or, not powered on.
Running successfully.
Initializing firmware.
Error between adapters has been detected.
Error in the adapter has been detected. (Operation
continued).
Error in the adapter has been detected. (Unable to
continue operation).
The device is selected.
Status
Lit = linkup
Not lit = link down
Lit = An error is detected
Not lit= Normal
52
Chapter 1 Overview