Installing The V-Belt Case - Yamaha 2012 TMAX XP500A Service Manual

tions of the cam are fitted firmly into the
serrations of the crankshaft.
• Also, make sure that cam is properly
seated.
• Apply grease to the thread and seat of the
primary sheave nut.
Recommended lubricant
Shell Sunlight Grease 3®
TIP
While holding the primary sheave with the
sheave holder "2", tighten the primary sheave
nut.
Primary sheave nut
160 Nm (16 m·kgf, 116 ft·lbf)
Sheave holder
90890-01481
EAS4B51025

INSTALLING THE V-BELT CASE

1. Install:
• Oil seal "1"
(into outer V-belt case)
Installed depth of oil seal "a"
4.0–4.3 mm (0.16–0.17 in)
2. Fill the space "b" shown in the illustration
with 10 g (0.35 oz) or more of lithium-soap-
based grease.
V-BELT AUTOMATIC TRANSMISSION
1
b
3. Install:
• Bearing retainer "1"
TIP
• Install the bearing retainer "1" with its mark
"a" facing outward.
• Apply locking agent (LOCTITE®) to the
threads of the bearing retainer bolt.
a
5-49
Bearing retainer bolt
11 Nm (1.1 m·kgf, 8.0 ft·lbf)
LOCTITE®
1
a