Installing The Engine - Yamaha 2012 TMAX XP500A Service Manual

EAS23720

INSTALLING THE ENGINE

1. Install:
• All removed parts
TIP
• Apply locking agent (LOCTITE®) to engine
mounting bolts (front right lower side) "2",
engine mounting bolts (front left lower side)
"3", and rear frame bolts "5".
• For installation, reverse the removal proce-
dure.
• Do not fully tighten the bolts and nuts.
2. Tighten:
• Engine mounting nut (front upper side)
"1"
• Engine mounting bolts (front right lower
side) "2"
• Engine mounting bolts (front left lower
side) "3"
• Engine mounting nut (rear side) "4"
• Rear frame bolts "5"
TIP
When tightening the engine mounting nuts and
engine mounting bolts, do not apply an upward
load to the frame, such as supporting the area
around steering head of the frame upwards.
Also, do not apply an upward or downward
load on the rear frame, such as supporting the
rear end of the rear frame upwards or pushing
it downwards.
Engine mounting nut (front
upper side)
88 Nm (8.8 m·kgf, 64 ft·lbf)
Engine mounting bolt (front
right lower side)
45 Nm (4.5 m·kgf, 33 ft·lbf)
LOCTITE®
Engine mounting bolt (front left
lower side)
45 Nm (4.5 m·kgf, 33 ft·lbf)
LOCTITE®
Engine mounting nut (rear side)
105 Nm (10.5 m·kgf, 76 ft·lbf)
Rear frame bolt
83 Nm (8.3 m·kgf, 60 ft·lbf)
LOCTITE®
5-7
ENGINE REMOVAL