Yamaha 2012 TMAX XP500A Service Manual page 243

6. Install:
• Outer tube bushing "1"
• Washer "2"
(with the fork seal driver weight "3" and
fork seal driver attachment "4")
Fork seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
Fork seal driver attachment
(ø43)
90890-01374
Replacement 43 mm
YM-A5142-3
7. Install:
• Oil seal "1"
New
(with the fork seal driver weight "2" and
fork seal driver attachment "3")
ECA14220
Make sure the numbered side of the oil seal
faces up.
TIP
• Lubricate the outer surface of the inner tube
with fork oil.
• Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
New
4-86
8. Install:
• Oil seal clip "1"
TIP
Adjust the oil seal clip so that it fits into the
outer tube's groove.
9. Install:
• Dust seal "1"
New
(with the fork seal driver weight "2")
Fork seal driver weight
90890-01367
Replacement hammer
YM-A9409-7
10. Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
FRONT FORK
New