Turning On The Printer - ABB HTP500 User Manual

The HTP500-PL3 Support Plate for the T-Blocks tag should be inserted in the HTP500 V2
printer in the way that the encoder, underneath the support plate, should be on the below left
lateral part.
Screw fixing
the guides
With the Support Plate positioned on the printer, fix the guides using the locking screw.
Once the guides are aligned, fix them in the desired position utilizing the screw.
Don't tighten the locking screw too much. Don't loosen the locking screw too much, only enough to
adjust and fix the guides in the proper position.
Insert the support plate till you hear a beep as in the picture

5.3 TURNING ON THE PRINTER

After preparing the printer and accessories, proceed with Turning On The Printer.
On the display will be visualized the message
PLEASE WAIT...
VERSION X.X
NOTICE
Guides for
regulating Items'
width
Left side where you
lay the Optical line
below the support
Plate