ABB HTP500 User Manual page 20

5) Set the cleaning cassette along the guides passing the cleaning cassette tape around the
cleaning auxiliary roller.
 THE CLEANING TAPE MUST NOT BE LOOSE!
 THE CLEANING TAPE MUST ALWAYS ADHERE TO THE CLEANING ROLLER
6) Raise the setting lever to lower the cleaning auxiliary roller into place.
After loading the cleaning cassette, make sure that the guide tabs are securely fixed in the
notches of the cassette.
2.4.2 Removing the Cleaning cassette
1) Lift up the cassette cover.
2) Take out the ribbon cassette.
3) Lower the setting lever. The cleaning roller will raise.
4) Take out the cleaning cassette.
Cassette
cover
The ribbon is
taken off
Correct position of
Cleaning tape and
Auxiliary Cleaning roller
NOTICE
NOTICE
rise the setting
LEVER IN set
POSITION
Lower rise the setting
LEVER in RELEASE
POSITION