Important Safety Information - ABB HTP500 User Manual

1.3 IMPORTANT SAFETY INFORMATION

Always observe the following warnings and cautions for a safe and correct use of HTP500
V2.
1.3.1 Printer Setup Location
The Printer is suitable to be used in internal environmental, in absence of dust or liquid
substances.
The Printer is not suitable to be used on external places and should not be exposed to
weathering.
The Printer cannot be used in places where it may be danger of explosion because it is not
suitable to be used in explosive atmosphere (the electrical equipment is not compliant with
regards to the risk of explosion, to the actual norm in force).
Place the HTP500 V2 in an operative environmental in which are observed the following
precaution:
Follow all described instructions with the printer turned off.
1) Install the printer HTP500 V2 on the Basis as shown on the following picture.
2) Open the Right support for inserting the Items in the Printer.