Print On Cable Tags - ABB HTP500 User Manual

PLEASE WAIT...
VERSION X.X
And afterwards the following message
PRINT READY..
STACK SBLACK
Take the "Support Plate" carefully and insert it beneath the "Card Store" till the mobile part is
just under the "Card Store"
The printer detects the "Support Plate" and moves it in the correct HOME position READY for
the Print.
When the "Support Plate" is in the correct HOME position, if you don't print with the PC in 5
minutes, the printer Automatically moves the "Support Plate" from the home position.
Be sure that the ONLINE light is turned on and that the HTP500 V2 is in ONLINE mode.

4.5 PRINT ON CABLE TAGS

Run the printing from software HTS500.
Press push Button New Job.
Select the Item to Print WM12 (or another one if you bought some others)
Press the Button New from the Generator Window.
Insert the data to print.
Press push button Confirm.
Press push button Close.
Press push button Run.
Press push button Print.
Press push button of the Device/Printer "AUTOMATIC CABLES"
REMIND