Setting Items Which Are Valid Only In The Job And Are Not Stored In Printer - Epson AcuLaser C1900 Service Manual

EPSON AcuLaser C1900/AcuLaser C900
1.4.5.2 Setting Items which are Valid only in the Job and are not
Stored in Printer
Table 1-44. Setting Items which are Valid only
in the Job and are not Stored in Printer
Setting
Paper Source Auto, MP Tray, LC
Paper Size A4, A5, B5, LT, HLT, GLT, EXE, Postcard,W Postcard, MON, C10,
DL, C5, C6, IB5, Yokei#0, Yokei#4, Yokei#6, Undefined
Copies 1 ~ 999
Resolution FAST, FINE
Duplex Printing ON, OFF
RITech ON, OFF
Toner Save ON, OFF
Top Offset -30 ~ 0 ~ 30 mm
Left Offset -30 ~ 0 ~ 30 mm
Paper Type Normal, Thick, Transparency, Coated paper, Envelope
Page Side Front, Back
Size Ignore ON, OFF
Avoid Error ON, OFF
Users can select setting values above with the driver, and the printer operates according
to the selected setting values.
Product Description
Value
Control Panel
Paper Source
Paper feeders are selected by the paper source setting.
Actually, however, paper feeders are selected in the following priority order, since
the paper type and the paper size settings influence the selection of paper feeders.
Paper Type = Thick paper, Transparency, Coated paper, or Envelope:
The MP tray is selected
Paper Type = Normal, and Paper Size = postcards or envelope:
The MP tray is selected
Paper Type = Normal, and Paper Size
• Paper Source =MP Tray or LC:
The designated paper feeders are selected.
• Paper Source=AUTO, when the feeders which match up to the designated
paper sizes are available:
According to the priority order, paper feeders are selected.
• Paper Source=AUTO, when the feeders which match up to the designated
paper sizes are not available:
According to the priority order, paper feeders are selected among the feeders
which have papers.
NOTE: By the driver, when Paper Type
envelope, the MP tray can be selected.
Paper Size
A paper size for printing is selected by the paper size setting.
Like the MP tray Size, paper size permits the setting of paper sizes supported by
the driver.
Undefined means the paper width is 92 to 216 mm and the paper length is 148 to
297 mm. However, for sheets of paper with a length not shorter than 148 mm but
shorter than 210 mm, printing is carried out in the low-speed <2> mode.
Copies
The number of multi-copies is designated by the copies setting.
Resolution
A resolution for internal processing is selected by the resolution setting.
Revision B
≠
postcards or envelope
≠
Normal or Paper Size = F4 or
60