EPSON AcuLaser C1900/AcuLaser C900
4.5.10 Main Motor Ass'y
1.
Remove the Rear Cover. (p.178)
2.
Remove the Engine Board (PWB-A). (p.184)
3.
Remove the Controller Box.
(See "Figure 4-25 (p.188)")
4.
Remove the wires from the code folder and then remove the Ass'y Cover. (2 screws)
(See "Figure 4-32 (p.191)")
5.
Remove the Fuser Loop Flapper Solenoid (SL6). (1 screw)
(See "Figure 4-33 (p.191)")
6.
Remove the Main Motor Ass'y. (4 screws)
(See "Figure 4-34 (p.191)")
Figure 4-32. Ass'y Cover Removal
Disassembly and Assembly
Printer Main Parts Disassembly and Assembly
Figure 4-33. Fuser Loop Flapper Solenoid (SL6) Removal
Figure 4-34. Main Motor Ass'y Removal
Revision B
191