Durability; Maintenance; Operating Conditions (Including Consumables) - Epson AcuLaser C1900 Service Manual

EPSON AcuLaser C1900/AcuLaser C900
Height of Curl of Printed Pages
Table 1-17. Height of Curl of Printed Pages
Paper type
Standard paper, plain paper
Transparency
Other special applications
NOTE 1: Same in both simplex printing and duplex printing
2: Measuring conditions
Non arrayed monochrome printing with 5% of image occupation rate, or
color printing with 5% of image occupation rate for each color (20% in
total). Measured after 1 p/J of intermittent printing for 10 sheets and leaving
unattended for one minute.
Image occupation rate and alignment pattern differ depending on printing
condition.

1.2.4.2 Durability

Printing Volume
Average 3,000 pages / per month
Maximum 35,000 pages / per month
NOTE: The standard mode provides print ratio between color <2P/J> and
monochrome <3P/J> as color: monochrome = 1: 3

1.2.4.3 Maintenance

MTTR Within 30 minutes in average.
(Time required for service personnel to determine and correct the cause of the
malfunction)
Product Description
Height of curl
30 mm or less
15 mm or less
Not regulated
Basic Specifications

1.2.5 Operating Conditions (Including Consumables)

Air Temperature and Humidity
Temperature (°C)
Printer is in operation 10 ~ 35
Printer is stopped
0 ~ 35
Air Pressure (Altitude)
741 hPa or more (2,500 m or less)
Level
1° difference or less in front and back, or left and right.
Lighting
3,000 lx or less (no exposure to direct sunlight)
Revision B
Table 1-18.
Humidity (%RH) Others
15 ~ 85 With no condensation
Unattended time:
10 ~ 85
72 hours or less
33