6A1-18 ENGINE MECHANICAL (G13B, 1-CAM 16-VALVES ENGINE)
INSTALLATION
1) Install new gaskets to cylinder head.
2) Install exhaust manifold.
3) Install exhaust manifold cover(s) (1).
4) Connect oxygen sensor coupler (3) and clamp (2) its wire se-
5) Tighten exhaust No.1 pipe to manifold nuts and exhaust man-
(b)
(a)
6) Connect negative cable at battery.
7) Check exhaust system for exhaust gas leakage.
Tighten bolts and nuts to specified torque.
Tightening Torque
.
(a): 32 N
m (3.2 kg-m, 23.5 lb-ft)
curely.
ifold stiffener bolt.
Tightening Torque
.
(a): 50 N
m (5.0 kg-m, 36.5 lb-ft)
.
(b): 50 N
m (5.0 kg-m, 36.5 lb-ft)