Wheel Bearing Inspection; Propeller Shaft Inspection (4Wd Vehicle Only); Drive Shaft Boot Inspction; Suspension System Inspection - Suzuki Swift User Manual

[Wheel disc inspection]
Inspect each wheel disc for dents, distortion and cracks. A disc in
badly damaged condition must be replaced.
[Tire rotation]
Rotate tires referring to SECTION 3F.

Wheel Bearing Inspection

1) Check front wheel bearing for wear, damage, abnormal noise or
rattles. For details, refer to SECTION 3D.
2) Check rear wheel bearing for wear, damage abnormal noise or
rattle. For details, refer to SECTION 3E.
ITEM 6-3

Propeller Shaft Inspection (4WD vehicle only)

1) Check propeller shaft connecting bolts for looseness. If loose-
ness is found, tighten to specified torque.
2) Check propeller shaft joints for wear, play and damage.
If any defect is found, replace.
3) Check propeller shaft center support (1) for biting of foreign mat-
ter, crack, abnormal noise and damage. If any defect is found,
replace.

Drive Shaft Boot Inspction

Check drive shaft boots (wheel side and differential side) for leak-
age, detachment, tear or any other damage.
Replace boot as necessary.
1. Drive shaft
2. Boot
ITEM 6-4

Suspension System Inspection

D Inspect front & rear struts for evidence of oil leakage, dents or any
other damage on sleeves; and inspect anchor ends for deteriora-
tion.
Replace defective parts, if any.
MAINTENANCE AND LUBRICATION 0B-15