Suzuki Swift User Manual page 269

THROTTLE BODY AND INTAKE MANIFOLD
: Tightening Torque
: Do not reuse
ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE) 6A-5
REMOVAL
1) Relieve fuel pressure according to procedure described in
"FUEL PRESSURE RELIEF PROCEDURE" of Section 6.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING:
To help avoid danger of being burned, do not remove
drain plug (2) and radiator cap while engine and radiator
(1) are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
1. Stay
2. Throttle body
3. Gasket
4. EFE heater
5. Intake manifold
6. Gasket