How To Display Ng Images - Sharp IV-S30 User Manual

Setting and Operating Outline

[2] How to display NG images

1
NG images can be displayed on the MAIN OPS MENU and on the NG image display screen (IV-S32M/
S33M).
(1) Displaying NG images on the MAIN OPS menu
An NG image (the latest or any previous NG image) recorded with camera 1 can be displayed on the
monitor while conducting measurements from the MAIN OPS MENU.
- This function only refreshes the NG image if another NG is captured. The screen is not refreshed
with normal image measurement results. Thus, this method is useful for an operation that has a
short cycle time and needs to process another workpiece soon after saving the NG image.
- When the measuring is stopped, NG images can also be displayed on the NG image display screen.
- See page 1-21.
The setting procedures are as follows:
1. Select "CAM1&NG-IMG" from the monitor output.
Select "2SELECT CAMERA", on the [TYPE MEAS COND] menu. - See page 3-3
[TYPE MEAS COND]
1OBJECT TYPE NO.
2SELECT CAMERA
3IMG PRE-PROCESS
2. Set the monitor output to "NG-IMG" or "CAM1&NG-IMG."
Select 1, "MONITOR OUTPUT" on the [TYPE RUN COND] menu. - See page 2-3.
Æ Æ Æ Æ Æ When the IV-S33M is used
[TYPE RUN COND]
1MONITOR OUTPUT CAM1 NG-IMG CAM1&NG-IMG
2CAPTURE IMG
MONITOR OUTPUT
CAM1
NG-IMG
CAM1&NG-IMG
Æ Æ Æ Æ Æ When the IV-S32M/S33M is used
[TYPE RUN COND]
1MONITOR OUTPUT CAM1 NG-IMG CAM1&NG-IMG
2CAPTURE IMG
MONITOR OUTPUT
CAM1
NG-IMG
CAM1&NG-IMG
00(0~63) NO YES
CAM1&2 CAM1&NG-IMG
(TO NEXT SUB-MENU)
PARTIAL-IMG WHOLE-IMG
Description
Display the camera 1 image on the whole screen.
Display the NG image on the whole screen.
Display the camera 1 image on upper half, and the NG image on lower half.
PARTIAL-IMG WHOLE-IMG NO
Description
Display the camera 1 image on the whole screen.
Display the NG image on the whole screen.
Display the camera 1 image on upper half, and the NG image on lower half.
1-18
F.IMG NG L
NO
F.IMG NG L