Menu Configuration - Sharp IV-S30 User Manual

Setting and Operating Outline

[2] Menu configuration

1
First layer
(MAIN OPS MENU)
MAIN OPS MENU
(1-4)
EVALUATION
COND CHANGE
(1-6)
PC MONITOR
(16-19)
NG-IMAG-DISP
(1-21)
*1 You can return to the MAIN OPS MENU from any menu screen in the 2nd or 3rd layer.
*2 You can directly access the evaluation conditions from the image setting conditions, such as the
gray scale search, edge inspection, and binary area conditions.
*3 The measurement programs that can execute a distance and angle measurement are as follows:
Positional deviation measurement, degree of match measurement, and object identification by
binary conversion (center of gravity), multiple position measurement, multiple degree of match
inspection.
- The numbers shown inside parentheses are reference page numbers.
- For the details about the simplified menu configuration, see the "IV-S30 User's Manual (Introduction
and Hardware)."
Second layer
(Upper and lower, two window style)
Upper screen
[SYSTEM COND] (1-13, 2-14)
1I/O CONDITIONS
2COMM. SET
3COMPUTER LINK
4INITIALIZATION (2-15)
5STD → SELECT MENU (1-3)
6SELF-DIAGNOSIS (2-16)
7GAIN-OFFSET
8TIME(2-17)
9CAMERA TYPE(2-19)
[TYPE RUN COND](2-1 to 2-13)
[TYPE MEAS COND] (3-1)
1OBJECT TYPE NO.
2SELECT CAMERA
3IMG PRE-PROCESS
3MEASURE 0 CAM1
4MEASURE 0 CAM2
5MEASUREMENT 1
6MEASUREMENT 2
7MEASUREMENT 3
8MEASUREMENT 4
TITLE etc.
*1
Lower screen
[I/O CONDITIONS] (17-1)
[SET COM PARM] (17-19)
[COMPUTER LINK] (17-20)
[GAIN-OFFSET] (2-18)
[IMG PRE-PROCESS]
[MEASUREMENT 0 CAMERA 1]
(1-11)
1MEAS SELECTION
2COMPARE IMGS (3-23)
3CHNG LIGHT LEBEL (3-14)
4SPACE FILTER (3-10)
[TYPE MEAS COND]
[POSITION CORRECTION] (3-26)
[MEASUREMENT 0 CAMERA 2]
(The items displayed are the same
as for MEASURE 0 CAM 1.)
[MEASUREMENT 1] (1-11)
1MEAS SELECTION
2SELECT CAMERA
3CHNG LIGHT LEBEL (3-14)
4SPACE FILTER (3-10)
[TYPE MEAS COND]
[MEASUREMENT 2 to 4]
(The items displayed are the same as for
MEASUREMENT1.)
[TITLE registration] (3-30)
[I/O for each object type] (3-33)
1TRIG CCD START (17-17)
2CCD TRIG COND
3SHUTTER SPEED (3-33)
4SERIAL OUTPUT (17-21 to 24)
5SET SERIAL BLOCK (17-22)
[SYSTEM for each object type] (3-34)
1REGST NG IMG (3-36)
2HALT ON NG MEAS (3-37)
3MNTR LIGHT LVL (3-31)
4LIGHT LVL COND
5COPY (3-34)
6INITIALIZATION (3-35)
7WINDOW PACKAGE MOVE (3-38)
1-8
*1
Third layer
[ADJ.IMG GRAY] (3-18)
[MASK BINARY IMG] (3-19)
[COMPARE IMGS] (3-23)
[GRAY-SCALE COND]
(4-3 etc.) *2
[EDGE DETECT COND]
(4-4 etc.) *2
[BINARY AREA COND]
(8-3 etc.) *2
[EVALUATION COND]
(3-16)
(including serial output settings)
[DISTANCE&ANGLE COND]
(Chapter 14) *3
[NUMERIC CALC COND]
(15-2)
[OUTPUT COND] (16-3)
[FINAL CALC COND] (15-10)
[FINAL OUTPUT COND] (16-11)
[CCD TRIGGER COND]
(17-18)
[LIGHT LEVEL COND] (3-31)