Sharp IV-S30 User Manual page 118

BGA/CSP Inspection
Setting the measurement programs (pages 1-10 to 1-11: Select "INSPECT-BGA/CSP" on the "MEAS
SELECTION" line, and press the SET key)
[TYPE MEAS COND]
6MEASUREMENT 1
[MEASUREMENT1]
1MEAS SELECTION
2SELECT CAMERA
3CHNG GRAY LEBEL
4SPACE FILTER
OPS-MENU RETURN LOCK
7
[TYPE MEAS COND]
6MEASUREMENT 1
[MEAS COND]
1WINDOW
2REGISTER NO.
REGISTER NO.
3BINARY AREA COND
NUMERIC CALC
OPS-MENU RETURN LOCK EVALUATION NUM-CALC OUT-COND
ÆSetting (display) of binary area conditions
1WINDOW
2REGISTER NO.
3BINARY AREA COND
Select any of the register numbers of binary area conditions with a circle.
When WINDOW has been set
to "NORMAL"
To the next page
INSPECT-BGA/CSP C1
NO POSI-DEVIATION CHK-DEG-MATCH
INSPECT-LEAD
MEAS-BIN-AREA CNT-BIN-OBJ LABEL-BIN-OBJ
POINT-MEAS MULTI-POSI MULTI-MATCHES
CAM1 CAM 2 CAMPARE-IMGS(CAM1)
NO YES(00.0TIMES γ+ γ - CHNG-L INCRS-M)
NO NUM-OF-TIMES 0(0~5)
INSPECT-BGA/CSP C1
NORMAL BINARY-IMG-MASK
0(0~3) NO YES
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
NORMAL BINARY-IMG-MASK
0
REGISTER NO.
NUMERIC CALC
(MEAS-COND)
INSPECT-BGA/CSP
(MEAS-COND)
NO YES
When item 2 REGISTER NO. is set to
"YES," a circle is displayed.
When CALC RESULT (see page 15-6) is
set to "YES," a circle is displayed.
: No setting
When WINDOW has been set to "BINARY-IMG-MASK"
To page 7-4
7-2
1. Select (MEAS-COND).
When "MEASUREMENT 1" is selected.
COMPARE IMGS- Pages 3-23 to 3-25
- Page 3-14
- Page 3-10
1. Select a window type.
- BINARY-IMG-MASK - page 3-19
2. Enter a register number, and select
"YES."
- When the window type has been set
to "BINARY-IMG-MASK," only register
number 0 is available.
3. Select the circle under the register
whose binary area conditions you want
to set.