Sharp IV-S30 User Manual page 152

Multiple degree of match inspection
Setting the measurement program (Page 1-10 to 1-11: Select "MULTI-MATCHES" on the "MEAS
SELECTION" line and press the SET key).
[TYPE MEAS COND]
6MEASUREMENT 1
[MEASUREMENT1]
1MEAS SELECTION
2SELECT CAMERA
3CHNG GRAY LEBEL
4SPACE FILTER
OPS-MENU RETURN LOCK
[TYPE MEAS COND]
6MEASUREMENT 1
[MEAS COND]
1DTECT PRECISION
2REGISTER NO.
3MATCHING
4DETECT ORDER
REGISTER NO.
5DTECT OBJECT
NUMERIC CALC
OPS-MENU RETURN LOCK EVALUATION DST&ANGL NUM-CALC OUT-CON
»Setting example for target detection and numerical calculation
REGISTER NO.
5DTECT OBJECT
NUMERIC CALC
When S (gray search) is selected and press the SET key
To the next page
MULTI MATCHES C1 (MEAS-COND)
NO POSI-DEVIATION CHK-DEG-MATCH
INSPECT-LEAD INSPECT-BGA/CSP
MEAS-BIN-AREA CNT-BIN-OBJ LABEL-BIN-OBJ
POINT-MEAS MULTI-POSI MULTI-MATCHES
CAM1 CAM 2 CAMPARE-IMGS(CAM1)
NO YES(00.0TIMES γ+ γ - CHNG-L INCRS-M)
NO NUM-OF-TIMES 0(0~5)
MULTI MATCHES C1 (MEAS-COND)
STANDARD HIGH
0(0~3) NO YES
AVG-GRAYS DIFF.ABS
SCAN-ORDER MATCH
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
"X" means no setting
1. Select MEAS COND (measurement
conditions) and press the SET key.
When "MEASUREMENT 1" is selected.
COMPARE-IMGS - Page 3-23 to 25.
- Page 3-14
- Page 3-10
- Page 3-7
1. Pick a register number (0 to 3) and
then select either "NO" or "YES."
2. Set the gray level (G) to detect in the
image. - Page 13-4.
3. Select "SCAN-ORDER" or "MATCH."
4. Select S (gray search) for an object to
detect and press the SET key.
To measure the distance and angle,
select this item and press the SET key.
- Chapter 14
When "YES" is selected on line "2
REGISTER NO.", "S" will be displayed.
When the calculation result is set to
"YES," (page 15-9), a circle will be
displayed.
13-2