Sharp IV-S30 User Manual page 157

Æ When a line passing through two points has been selected as the auxiliary points
1OBJECT
2AUXILIARY NO.
3COND.1
4COND.2
6AUX.1: SLOPE ANGL
7AUX.2: Y INDENT
8RUN A TEST
- The line passing through two points is the line that passes through points 1 and 2 specified
in items 3 and 4 (COND. 1/2)
Zero position (0, 0)
Slice through the Y axis
(Y axis coordinate)
Æ When the intersection of two lines has been selected as the auxiliary points
1OBJECT
2AUXILIARY NO.
3COND.1
4COND.2
5AUX JUDGEMENT1 000.0~511.0
6AUX JUDGEMENT1 000.0~479.0
7RUN A TEST
- The intersection of two lines is the point where lines 1 and 2, specified in items 3 and 4
(COND. 1/2), cross.
Line 1
Select "NUM-CALC" and press the SET key.
To page 14-6
AUX DST ANGL
00(0~15) NO MID-PNT CIRC-C GRAV LINE-2P
INTERSECTION
MEAS-REGNO MDL0 AUX NO
MEAS-REGNO MDL0 AUX NO
[TEST RESULT] [OUTPUT]
dl=001.5
Y=210.0
EXEC
512
Slope (
Point 1
Point 2
(Units used above: Pixel)
Y axis
AUX DST ANGL
00(0~15) NO MID-PNT CIRC-C GRAV LINE-2P
INTERSECTION
AUX NO
AUX NO
[TEST RESULT] [OUTPUT]
X=260.0
Y=340.0
EXEC
Line 2
Intersection
14-3
Distance and Angle Measurement
You have to specify these settings.
OK NO
See the description for "7 RUN A
TEST" on the previous page.
X axis
Image display area
Y
- In this system, the angle of the slope is referred
)
X
to as a negative angle if it is CW from the
horizontal (X axis), and as a positive angle if it
is CCW from the horizontal (X axis).
Coordinates (511, 479)
Line passing through two points
Specify the auxiliary number for the
intersection selected in item 2.
OK NO
See the description for "7 RUN A
TEST" on the previous page.
14