Application Notes For Pcb Designers - Fujitsu MB86R02 Jade-D Hardware Manual

MB86R02 'Jade-D' Hardware Manual V1.64
config_byte_7
config_byte_8
config_byte_9
config_byte_10
config_byte_11
config_byte_shell_1
config_byte_shell_2
config_byte_shell_3
config_byte_shell_4
ANALOG PARAMETERS
are subject to change
17.6.1.2.3 Indigo configuration
Use Indigo Modepins APIX_CFG[2:0]=001
Indigo configuration
config_byte_1
config_byte_2
config_byte_3
config_byte_4
config_byte_5
config_byte_6
config_byte_7
config_byte_shell_1
config_byte_shell_2
config_byte_shell_3
config_byte_shell_4
ANALOG PARAMETERS
are subject to change
Table 17-13, Indigo Configuration

17.6.2 Application Notes for PCB Designers

Full documentation of the configuration of pins related to the APIX unit is not yet available. The
following information describes APIX related pins and their configuration for PCB designers.
OSC_MODE[1:0]
Selects the operating mode of the internal oscillator that is used to generate the clock for APIX (can
also be used as an alternative clock for the System PLL by the way).
Values:
00 = Power OFF, no clock output
01 = Input to the oscillator is a dedicated external clock generator source (not an XTAL)
17-44
00h
48h
02h
02h
40h
26h
04h
9Ah
00h
7Fh
BCh
86h
00h
61h
C0h
93h
00h
E0h
09h
A0h