Show Snmp Group - Dell PowerEdge M420 Reference Manual

user-filter1
user-filter1

show snmp group

Use the show snmp group command in Privileged EXEC mode to display the
configuration of groups.
Syntax
show snmp group [
groupname — Specifies the name of the group. (Range: 1-30)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The group name accepts any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the name. The surrounding quotes are not used as part of the name. The CLI
does not filter illegal characters and may accept entries up to the first illegal
character or reject the entry entirely.
Example
The following examples display the configuration of views.
console# show snmp group
Name
----------------- -----
----
user-group
1.3.6.1.2.1.1
1.3.6.1.2.1.1.7
groupname
]
Security
Model Level
------
V3 Auth-Priv
Included
Excluded
Views
Read Write
-------- -------- --
Default ""
SNMP Commands
Notify
""
1477