Dell PowerVault MD3620f Command Line Interface Manual page 35

Table 2-3. General Form of the Script Commands
Command Syntax
download object
{statement-data}
enable object
{statement-data}
recopy object
{statement-data}
recover object
{statement-data}
recreate object
{statement-data}
remove object
{statement-data}
repair object {statement-data} Repairs errors found by the check command.
reset object {statement-data} Returns the hardware or object to an initial state.
resume object
revive object
save object {statement-data}
set object {statement-data}
show object {statement-data} Displays information about the object.
start object {statement-data}
stop object {statement-data}
suspend object
{statement-data}
(continued)
Description
Transfers data to the storage array or hardware
associated with the storage array.
Allows a feature to operate.
Restarts a virtual disk copy operation by using an
existing virtual disk copy pair. You can change
attributes before the operation is restarted.
Re-creates an object from saved configuration data
and the statement attributes (similar to the create
command).
Restarts a snapshot operation using an existing
snapshot virtual disk. You can change attributes
before the operation is restarted.
Removes a relationship from between objects.
Starts a suspended operation. The operation begins
where it left off when suspended.
Forces the object from the Failed to the Optimal
state. Use only as part of an error recovery procedure.
Writes information about the object to a file.
Changes object attributes. All changes are completed
when the command returns.
Starts an asynchronous operation. You can stop some
operations after they have started. You can query the
progress of some operations.
Stops an asynchronous operation.
Suspends an operation. You can then restart the
suspended operation, and it continues from the point
at which it was suspended.
About the Script Commands
35