NOTE:
You must use the
nonaccess virtual disk or an access virtual disk. The script engine ignores the
hostGroup
or
parameters.
Repair Virtual Disk Consistency
This command repairs the consistency errors on a virtual disk.
Syntax
repair virtualDisk [virtualDiskName] consistency
consistencyErrorFile="filename"
[verbose=(TRUE | FALSE)]
Parameters
Parameter
virtualDisk
consistencyError
File
verbose
212
Script Commands
host
and
parameters when you use the
Description
Name of the specific virtual disk for which to repair
consistency. You must put brackets ([ ]) around the virtual
disk name. If the virtual disk name has special characters,
you must also put quotation marks (" ") around the virtual
disk name.
Name of the file that contains the consistency error
information you use to repair the errors. You must put
quotation marks (" ") around the file name.
Captures progress details, such as percent complete, and
shows the progress detail information as virtual disk
consistency is being repaired. To capture progress details, set
this parameter to TRUE. To prevent capturing progress
details, set this parameter to FALSE.
hostGroup
parameters when specifying a
allVirtualDisks
virtualDisks
or
host