Set Physical Disk State; Set Raid Controller Module - Dell PowerVault MD3620f Command Line Interface Manual

Set Physical Disk State

This command sets a physical disk to the Failed state. (To return a physical
disk to the optimal state, use the revive physicalDisk command.)
Syntax
set (physicalDisk [enclosureID,slotID] |
physicalDisks [enclosureID1,slotID1 enclosureID2,
slotID2 ... enclosureIDn,slotIDn])
operationalState=failed
Parameter
Parameter
physicalDisk or
physicalDisks

Set RAID Controller Module

This command defines the attributes for the RAID controller modules.
Syntax
set controller [(0 | 1)]
availability=(online | offline | serviceMode) |
ethernetPort [(1 | 2)]=ethernetPortOptions |
globalNVSRAMByte [nvsramOffset]=
(nvsramByteSetting |
nvsramBitSetting) |
hostNVSRAMByte [hostType, nvsramOffset]=
(nvsramByteSetting |
nvsramBitSetting) |
IPv4GatewayIP=ipAddress |
IPv6RouterAddress=ipv6Address |
iscsiHostPort [(1 | 2 | 3 | 4)]=
Description
The enclosure and the slot where the physical
disk resides. Enclosure ID values are 0 to 99. Slot
ID values are 0 to 31. Enclose the enclosure ID
values and the slot ID values in square brackets ([
]).
Script Commands
241