Save Storage Array Configuration - Dell PowerVault MD3620f Command Line Interface Manual

Save Storage Array Configuration

This command creates a script file that you can use to create the current
storage array virtual disk configuration.
Syntax
save storageArray configuration file="filename"
[(allConfig | globalSettings=(TRUE | FALSE)
virtualDiskConfigAndSettings=(TRUE | FALSE)
hostTopology=(TRUE | FALSE)
lunMappings=(TRUE | FALSE))]
Parameters
Parameter
file
allConfig
globalSettings
virtualDiskConfigAn
dSettings
hostTopology
222
Script Commands
Description
Name of the file that contains the configuration values.
You must put quotation marks (" ") around the file
name.
Saves all of the configuration values to the file. (If you
choose this parameter, all of the configuration
parameters are set to TRUE.)
Saves the global settings to the file. To save the global
settings, set this parameter to TRUE. To prevent saving
the global settings, set this parameter to FALSE. The
default value is TRUE.
Saves the virtual disk configuration settings and all of
the global settings to the file. To save the virtual disk
configuration and global settings, set this parameter to
TRUE. To prevent saving the virtual disk configuration
and global settings, set this parameter to FALSE. The
default value is TRUE.
Saves the host topology to the file. To save the host
topology, set this parameter to TRUE. To prevent saving
the host topology, set this parameter to FALSE. The
default value is FALSE.