Dell PowerVault MD3620f Command Line Interface Manual page 184

Syntax
create virtualDiskCopy source="sourceName"
target="targetName"
[copyPriority=(highest | high | medium | low |
lowest)
targetReadOnlyEnabled=(TRUE | FALSE)]
Parameters
Parameter
source
target
184
Script Commands
Description
Name of an existing virtual disk to use as
the source virtual disk. You must put
quotation marks (" ") around the source
virtual disk name.
NOTE:
You can use any combination of
alphanumeric characters, hyphens, and
underscores for the names. Command
names can have a maximum of 30
characters. If you exceed the maximum
character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome
this limitation.
Name of an existing virtual disk to use as
the target virtual disk. You must put
quotation marks (" ") around the target
virtual disk name.
NOTE:
You can use any combination of
alphanumeric characters, hyphens, and
underscores for the names. Command
names can have a maximum of 30
characters. If you exceed the maximum
character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome
this limitation.