timeout
NOTE:
This command waits until the status becomes Optimal or the timeout
interval expires. Use this command when you run the Asynchronous Remote
Replication utility.
Check Virtual Disk Consistency
This command checks a virtual disk for consistency and media errors, and
writes the results of the check to a file.
Syntax
check virtualDisk [virtualDiskName]
consistency [consistencyErrorFile=filename]
[mediaErrorFile=filename]
[priority=(highest | high | medium | low |
lowest)]
[startingLBA=LBAvalue] [endingLBA=LBAvalue]
[verbose=(TRUE | FALSE)]
Parameters
Parameter
virtualDisk
consistencyErrorFile
mediaErrorFile
148
Script Commands
The time interval within which the software can return the
remote replication virtual disk status. The timeout value is
in minutes.
Description
Name of the specific virtual disk to check
consistency. You must put brackets ([ ]) around the
virtual disk name. If the virtual disk name has
special characters, you must also put quotation
marks (" ") around the virtual disk name.
Name of the file in which to save the consistency
error information. You must put quotation marks
(" ") around the file name.
Name of the file in which to save the media error
information. You must put quotation marks (" ")
around the file name.