The command in this example, like the create virtualDisk command in the
previous example, creates a new virtual disk. The significant difference
between these two examples is that this example shows how you can define
specific physical disks to include in the virtual disk. To find out what physical
disks are available in a storage array, run the show storageArray profile
command.
The following syntax is the general form of the create virtualDisk command
shown in the previous example:
create virtualDisk raidLevel=(0 | 1 | 5 | 6)
userLabel="virtualDiskName" physicalDisks=
(enclosureID0,slotID0... enclosureIDn,slotIDn)
[capacity=virtualDiskCapacity | owner=(0 | 1) |
segmentSize=segmentSizeValue]
[enclosureLossProtect=(TRUE | FALSE)]
Sample Script Files
317