Show String
This command shows a string of text from a script file. This command is
similar to the echo command in MS-DOS and UNIX.
Syntax
show "textString"
Parameters
None.
NOTE:
You must enclose the string in double quotation marks (" ").
Show Virtual Disk
For the virtual disks in a storage array, this command returns the following
information:
•
The number of virtual disks
•
The name
•
The status
•
The capacity
•
The RAID level
•
The disk group where the virtual disk is located
•
Details:
–
The virtual disk ID
–
The subsystem ID
–
The physical disk type (SAS)
–
Enclosure loss protection
–
The preferred owner
–
The current owner
–
The segment size
–
The modification priority
–
The read cache status (enabled or disabled)
–
The write cache status (enabled or disabled)
Script Commands
287