Show Remote Replication Virtual Disk Candidates
NOTE:
This command valid only with Fibre Channel storage arrays.
This command returns information about the candidate virtual disks on a
remote storage array that can be used as secondary virtual disks in a Remote
Replication configuration.
Syntax
show remoteReplication candidates primary=
"virtualDiskName"
remoteStorageArrayName=storageArrayName
Parameters
Parameter
primary
remoteStorageArrayName The remote storage array that contains possible
Description
The name of the local virtual disk that you want for
the primary virtual disk in the remote-replicated
pair. Enclose the primary virtual disk name in
double quotation marks (" ").
virtual disks for a secondary virtual disk. If the
remote storage array name has special characters, it
must be enclosed in double quotation marks (" ").
Script Commands
279