Yamaha DM1000 Owner's Manual page 66

66
Chapter 6—Input Channels
The parameters on this page are described below:
A
EQ ON
The ON/OFF button turns the currently-selected Input Channel's EQ on or off. You can
press the [ENTER] button to turn the EQ on or off as long as the cursor is located on
any parameter other than TYPE.
B
TYPE
Selects the type of EQ. TYPE I is the EQ type used on legacy Yamaha 02R series digital
mixing consoles. TYPE II is a newly developed algorithm.
C
ATT
Determines the amount of pre-EQ signal attenuation in dB. It is the same Attenuator
parameter that appears on the EQ | ATT 1-16, ATT 17-32, and ATT 33-48 pages.
D
CURVE
This area displays the current EQ curve.
E
Meters
These meters indicate the post-EQ signal levels of the currently-selected Input Channel
and its available pair partner.
F
LOW, L-MID, H-MID, HIGH sections
These sections contain the Q, Frequency (F), and Gain (G) parameters for the four
bands. These parameter values range as follows:
1. The LOW and HIGH GAIN controls function as filter on/off controls when Q is set to HPF or LPF
Tip:
• The LOW-band EQ functions as a high-pass filter when the Q parameter in the LOW section
is set to HPF. It functions as a shelving-type EQ when the Q parameter is set to L.SHELF.
• The HIGH-band EQ functions as a low-pass filter when the Q parameter in the HIGH sec-
tion is set to LPF. It functions as a shelving-type EQ when the Q parameter is set to H.SHELF.
3 Move the cursor to the desired parameter, then rotate the Parameter wheel
to change the value.
Tip:
• You can also press the buttons in the SELECTED CHANNEL section to select the desired
band and use the rotary controls to directly edit the Q, F, and G parameters (see page 71).
• You can store the EQ settings in the EQ library, which features preset programs that can be
used for various applications (see page 177).
DM1000—Owner's Manual
Parameter LOW
HPF, 10.0 to 0.10
Q
(41 steps), L.SHELF
Frequency
Gain
respectively.
LOW-MID
10.0 to 0.10 (41 steps)
21.2 Hz to 20.0 kHz (120 steps per 1/12 octave)
–18.0 dB to +18.0 dB (0.1 dB steps)
HIGH-MID HIGH
LPF, 10.0 to 0.10
(41 steps), H.SHELF
1