Yamaha DM1000 Owner's Manual page 129

• ...................... The sound image moves between front and rear while tracing an arc.
40 48 44
• ...................... The sound image moves while tracing a circle or oval. With this pat-
44 48 32
4 If necessary, fine-tune the trajectory by editing the WIDTH, DEPTH, OFFSET
( ), and OFFSET (
5 To set the surround pan position, move the cursor to anywhere outside the
parameter boxes, then rotate the Parameter wheel.
Tip: You can also adjust the pan position using the Encoders if you assign the surround pan
parameters to the Encoders.
6 To adjust the surround pan using the Joystick, press the SELECTED CHANNEL
[GRAB] button (the button indicator lights up), then operate the Joystick.
In this way, you can move the current pan position icons (
the [GRAB] button is turned off, placing the small square (
will automatically turn on the [GRAB] button.
This Joystick function can be disabled by the Joystick Auto Grab preference (see page 252)
on the Setup | Prefer1 page.
7 To link the surround pan settings of two channels displayed on the page,
turn on the ST LINK button.
Use the PATTERN parameter box below the ST LINK button to specify how you want the
linked surround pan to move.
With this pattern, you can also fine-tune the radius and shape of the
arc using the WIDTH, DEPTH, OFFSET (
parameters.
44 20 32
tern, you can also fine-tune the radius and shape of the circle or oval
using the WIDTH, DEPTH, OFFSET (
eters.
24 24 24
) parameter values.
Using Surround Pan
), and OFFSET (
28 56 32
), and OFFSET ( ) param-
60 40 52
) directly and quickly. Even if
) over the small diamond (
DM1000—Owner's Manual
129
)
24
11
40
)