Delay Lcr - Yamaha DM1000 Owner's Manual

MOD. DELAY
One input, two output basic repeat delay with modulation.
Parameter
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON
1
DLY.NOTE
2
MOD.NOTE
1.
tempo setting)
2.

DELAY LCR

One input, two output 3-tap delay (left, center, right).
Parameter
DELAY L 0.0–2730.0 ms
DELAY C 0.0–2730.0 ms
DELAY R 0.0–2730.0 ms
FB. DLY 0.0–2730.0 ms
LEVEL L –100 to +100%
LEVEL C –100 to +100%
LEVEL R –100 to +100%
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON
1
NOTE L
NOTE C 1
NOTE R 1
NOTE FB
1
1.
tempo setting)
Range
Delay time
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Modulation waveform
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY
Used in conjunction with TEMPO to determine FREQ
Range
Left channel delay time
Center channel delay time
Right channel delay time
Feedback delay time
Left channel delay level
Center channel delay level
Right channel delay level
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
High-frequency feedback ratio
Tempo parameter sync on/off
Used in conjunction with TEMPO to determine DELAY L
Used in conjunction with TEMPO to determine DELAY C
Used in conjunction with TEMPO to determine DELAY R
Used in conjunction with TEMPO to determine FB. DLY
Effects Parameters
Description
(Maximum value depends on the
Description
(Maximum value depends on the
DM1000—Owner's Manual
293