Before Reading This Manual - Komatsu ecot3 Operation And Maintenance Manual

BEFORE READING THIS MANUAL

BEFORE READING THIS MANUAL
This manual gives details of the operation and methods of inspection and maintenance for this machine that must
be obeyed in order to use the machine safely. Most accidents are caused by the failure to follow fundamental safety
rules for the operation and maintenance of machines.
Read, understand and follow all precautions and warnings in this manual and on the machine before performing
operation and maintenance. Failure to do so may result in serious injury or death.
Komatsu cannot predict every circumstance that might involve a potential hazard when the machine is used.
Therefore, the safety messages in this manual and on the machine may not include all possible safety precautions.
If you carry out any operation, inspection, or maintenance under conditions that are not described in this manual,
understand that it is your responsibility to take the necessary precautions to ensure safety. In no event should you
or others engage in the prohibited uses or actions described in this manual. Improper operation and maintenance
of the machine can be hazardous and could result in serious injury or death.
If you sell the machine, be sure to give this manual to the new owner together with the machine.
Always keep this Operation and Maintenance Manual in the
location shown on the right so that all relevant personnel can read
it at any time.
Storage location for the Operation and Maintenance Manual:
magazine box on the left side of the operator's seat.
If this manual is lost or damaged, contact and tell your distributor about the machine model name and the serial No.
immediately to arrange for its replacement. For details regarding the machine model name and the serial No., see
the machine serial No. plate. In order to arrange the proper Operation and Maintenance Manual, you will need to
provide the machine model name and the serial No. to your Komatsu distributor.
This manual uses the international units (SI) for units of measurement. For reference, units that have been used in
the past are given in ( ).
The explanations, values, and illustrations in this manual have been prepared based on the latest information
available as of the date of its publication. Continuing improvements in the design of this machine may lead to
additional changes that are not reflected in this manual. Consult Komatsu or your Komatsu distributor for the latest
available information concerning your machine or with questions regarding information contained in this manual.
The numbers in circles in the illustrations correspond to the numbers in ( ) in the text.
(For example: 1 → (1))
Komatsu delivers machines that comply with all applicable regulations and standards of the country to which it has
been shipped. If this machine has been purchased in another country, it may lack certain safety devices and
specifications that are necessary for use in your country. If there is any question about whether your product
complies with the applicable standards and regulations of your country, consult Komatsu or your Komatsu
distributor before operating the machine.
1 - 2
FOREWORD