Komatsu ecot3 Operation And Maintenance Manual page 186

OPERATION OPERATION
4. Loosen camera mounting bolt (5) and adjust camera installing
angle (A) so that the side of camera matches the edge of
bracket (B).
REMARK
Part of the machine is shown on the monitor screen.
5. After adjusting, tighten bolt (5).
Tightening torque: 11.8 to 14.7 Nm (1.2 to 1.5 kgm, 8.7 to 10.8
lbft)
6. Install covers (1) and (2).
MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS
3 - 129