Komatsu ecot3 Operation And Maintenance Manual page 195

MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS
3. Turn fuel control dial (2) to a point midway between low idle
(MIN) and high idle position (MAX), run the engine under no
load at a mid-range speed until engine coolant temperature
monitor (1) displays the correct temperature.
(A) Display when temperature is correct: Monitor background (C)
(B) Display when temperature is low: Monitor background (C) is
If the engine coolant temperature monitor displays the correct temperature, the engine warm-up operation is
completed.
After checking that the engine coolant temperature monitor displays the correct temperature, carry out the warm-up
operation for the hydraulic equipment.
NOTICE
Canceling automatic warm-up operation
If it becomes necessary in an emergency to cancel the automatic warm-up operation or to lower the engine speed to low idle, do
as follows.
1) Turn fuel control dial (2) to high idle position (MAX) and
hold it for 3 seconds.
2) When fuel control dial (2) is returned to the low idle (MIN)
position, the engine speed will drop.
3 - 138
is blue
white
OPERATION OPERATION