Komatsu ecot3 Operation And Maintenance Manual page 83

DETAILED CONTROLS AND GAUGES
Monitor Switches Portion
(1) Working mode selector switch
(2) Auto-deceleration switch
(3) Travel speed selector switch
(4) Wiper switch
Working Mode Selector Switch
Use this switch (1) to set the movement or power of the work
equipment.
The operation becomes easier if the mode is selected to match the
content of the operation.
P mode: For heavy-load operations
E mode: For operation with emphasis on fuel consumption
L mode: For fine control operations
B mode: For breaker operations
ATT mode: For double-acting circuit attachment, such as crusher
(attachment-ready machines)
When the monitor first appears, it is automatically set to the
mode in use when it was started the previous time.
Press switch (1) to display the working mode selection screen.
For each set mode, the pilot monitor at the top right of the
monitor display shows P, E, L, B, ATT.
3 - 26
(5) Window washer switch
(6) Buzzer cancel switch
(7) Function switches
(8) Air conditioner switch
OPERATION