Komatsu ecot3 Operation And Maintenance Manual page 85

DETAILED CONTROLS AND GAUGES DETAILED CONTROLS AND GAUGES
Procedure for operation
1. If working mode selector switch (1) is pressed, the Working
Mode screen is displayed on the monitor.
2. Press function switches F3 or F4 at the bottom of the screen or
working mode selector switch (1) to change the mode selection
one at a time.
If no switch is touched for more than 5 seconds, the selected
working mode is automatically set as the working mode and
the screen changes to Steps 3 and Steps 4.
REMARK
To return to the standard screen without changing the working
mode, press function switch F5.
3. After selecting the desired mode, press function switch F6 and
the mode is displayed in the center of the monitor display.
(Example: If power mode is selected: P)
4. After 2 seconds, the pilot monitor display at the top right of the
screen is highlighted in orange.
After 2 seconds, the screen returns to the standard screen.
The monitor display highlighted in orange in Steps 4 returns to
blue.
3 - 28
OPERATION OPERATION