Verizon NCM1100E User Manual page 25

COMPUTER NETWORK CONFIGURATION
To initialize the WPS process, you can either press and hold the WPS button
located on the rear of your Gateway for more than two seconds or use the UI and
press the on-screen button.
You can easily add Wi-Fi devices to your Wi-Fi network using the WPS option if
your Wi-Fi device supports the WPS feature.
To access WPS using the user interface:
1. From the Basic
Wi-Fi Protected Setup. Wi-Fi Protected Setup
2. Enable the protected setup by moving the selector to on
3. Use one of the following methods:
• If your Wi-Fi client device has a WPS button, press the WPS button
on your Gateway for more than two seconds, then click the Start
WPS button in Option 1 WPS
• If your client device has a WPS PIN, locate the PIN printed on the
client's label or in the client documentation. Enter the PIN number in
Option 2 on the user interface. Option 2
Basic menu, select Wi-Fi
Option 1 to start the WPS registration process.
Wi-Fi settings, then click
on.
Start