HP 3000 Manual page 280
Mpe/ix computer systems, rpg/xl utilities
Hide thumbs
Also See for 3000:
- Limited warranty (17 pages) ,
- Diagnostic manual (10 pages) ,
- Installation manual (39 pages)
Advertisement
7
Press f1 (FROM POSITION).
8
Position the cursor at the line's ending position.
9
Press f2 (TO POSITION). (Repeat steps 5 through 9, as needed, to draw all the desired lines.)
10 Press ENTER .
11 Press ENTER again to save the form, or press f7 to abandon
12 Press f8 to return to the main menu.
Editing Field Attributes
1
From the main menu, press f1 (SELECT FRMS FIL) to open a form file.
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f3 (EDIT FLD ATTRIB.).
4
Position the cursor in the correct field using the f1 , f2 , or f3 key.
5
To display the attribute specification form, press f7 (SEE ATTRIB.).
6
Press f7 (SEE ATTRIB) to display the attribute specification form.
7
Enter the attributes using the tab key to move from field to field.
8
Press f1 (SET FIELD).
9
Press f8 to return to the main menu.
Editing Form Attributes
1
Press f1 (SELECT FRMS FIL) from the main menu.
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f2 to edit form attributes.
4
Enter specifications using the tab key to move from field to field.
5
Press ENTER when form specifications are complete.
6
Press f8 to return to the main menu.
Erasing Lines on a Form
1
Press f1 (SELECT FRMS FIL) from the main menu.
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f1 (EDIT FORM).
4
Press f8 twice to display the line drawing menu.
5
Press the f5 key (ERASE).
6
Position the cursor at the line's starting position.
7
Press the f1 key (FROM POSITION).
8
Position the cursor at the line's ending position.
9
Press the f2 key (TO POSITION).
10 Press ENTER
11 Press ENTER again to save the form, or press f7 to abandon changes.
12 Press f8 to return to the main menu.
4- 282
changes.
Advertisement
