HP 3000 Manual page 181

DELETE command, the lines being deleted are displayed. (You may not wish to have all the lines being
deleted displayed. By typing <Control Y> you stop the listing. <Control Y> does not stop the execution of
the command, however.)
Related Commands
Another method of entering Line Mode from Block Mode is the the special function key F7, when the
softkey label for F7 reads "LINE MODE".
Execution mode: Line
Examples
The following is a legal abbreviation of the LINE command:
LIN Shift to Line Mode.
LIST
LIST prints the work file on the screen or on the line printer.
Form
L[IST] [lb[/le]] [O[FF]]
Parameter explanation
lb First or only line you want to have displayed.
le Last line of a range you want displayed on the screen.
O[FF] Print offline on a line printer with the formal file name of "RISELIST" and device class of
"LP".
Purpose
The LIST command prints all or a portion of the work file on the screen or line printer. If you do not
specify a line or lines for listing, only the line following the current position of the record pointer is listed.
You specify the "OFF" parameter to list offline to a line printer.
Related Command
The PRINT command will also list lines offline on a line printer. PRINT has an additional feature:
whenever the RPG form type in column 6 changes, it skips three lines so that your listing is in a more
readable form. The PRINT command will also print offline the compilation listing produced by a V[ERIFY]
R[PG] command.
* Execution mode:
* Record pointer:
* Control Y: Halts execution of the command.
EXAMPLES
The following are legal abbreviations which may be used with the LIST command and its parameters:
LIS A List the complete contents of the work file.
L F/10 List the first through line 10.
Line.
At the last line printed.
2- 183