HP 3000 Manual page 146

portion of SIMCAL is entered. Various parameters are used. Errors are committed, and the messages
appear with the listing.
In the first example below, when the ADD command creates a work file, the ADD begins at line 1 because
the file is empty. If the file existed previously, RISE would display the last line in the file and the next line
number, where the ADD would begin.
RISE prompts with line numbers for you to enter text. Two slashes (//) at the beginning of a line terminate
the ADD command. The ADD command can also be terminated by <Control Y>.
Initially, in the first example, an error is committed when the ADD command is given in lower case letters.
RISE only accepts capital letters (1). Following the error, the ADD command is legally entered with a
message and line number prompt (2). No text is entered, however. Instead, a command is entered which
calls for a display of the column indicator (3). This command could have been entered immediately
following the ADD command in the following form:
A[DD] ^^COL
(1) >add
Error 195: Only capital letters are allowed.
(2) >ADD
(3) Creating work space file.
1: ^^COL
In the next example, in which the column indicator is displayed, an error is committed when an illegal
Record Specification form is commanded (1). Following the correct entry of a command for a Header
Specification form (2), the form is displayed and the first line of text added (3). Another error is made
when an alphabetic integer (TWO) is used with the R[EPEAT] parameter (4). Following the error
message, the command is given correctly (5).
0
(1)
12345678901234567890123456789012345678901234567890123456789012345678901234567890
1
(2) Error 176:
1
2- 148
1 2
:^^X
Only H,F,E,L,I,C,O,COL or Repent allowed after ^^.
:^^H
3 4 5 6 7