HP 3000 Manual page 240

NUM
--------------------------------------------------------------------------------------
157 Expecting SOURCE after WITH.
158 Expecting WITH SOURCE after SEQNUM.
159 Expecting SEQNUM after WITH.
160 Only WITH or BY allowed after SOURCE.
161 Syntax error on SOURCE.
162 Syntax error on SEQNUM.
163 Can't distinquish between SOurce and SEqnum.
164 Syntax error on WITH.
165 A source line number has non-numeric characters.
166 A source line number is not in ascending sequence.
167 No room between lines to insert a page.
168 Syntax error on Get command.
169 Can't execute Get command from a file.
170 Only 0-8 allowed for a softkey from a file.
171 Pause length must be 0 to 64000.
172 Syntax error on FOrm.
173 Only H,F,E,L,I,C,O, or COI allowed.
174 Missing or illegal offset integer after *.
175 Expecting ^^.
176 Only H,F,E,L,I,C,O,COL and/or Repeat allowed after ^^.
177 Syntax error on By.
178 Syntax error on Repeat.
179 Illegal integer value after Repeat.
180 Unexpected error&--;read from terminal failed!
181 Line truncated to 80 characters.
182 Only DELETE, LIST or MODIFY allowed in Add mode.
183 FATAL ERROR in Show Mode, returning to Line Mode.
184 Line would exceed 80 characters.
185 Syntax error on MODIFY command.
186 Can't distinquish MODify and MOVe commands.
187 A subcommand may only be entered in columns 1-80.
188 Should be blank after Repeat option.
D- 242
Error Message