HP 3000 Manual page 238

NUM
--------------------------------------------------------------------------------------
93 No parameters are allowed with this command.
94 No string to find.
95 Missing range after IN option.
96 Only a delimited string and/or IN range allowed.
97 Missing close delimiter.
98 A string must be given between the delimiters.
99 A slash (/) cannot delimit a string.
100 Should be blank after line range.
101 'oldstring' TO 'newstring' missing.
102 Oldstring & newstring must be enclosed by delimiters.
103 TO missing after 'oldstring'.
104 Only IN range allowed after 'newstring'.
105 Missing close delimiter for 'oldstring'.
106 An oldstring must be specified between delimiters.
107 Missing close delimiter for 'newstring'.
108 A newstring must be specified between delimiters.
109 Oldstring length must equal newstring length.
110 Syntax error on LINE command.
111 Syntax error on LIST command.
112 Can't distinquish between LINe or LISt command.
113 Missing MPE command.
114 Undefined MPE command.
115 Could not execute this command.
116 Can't keep to a KSAM file&--;only sequential file.
117 Syntax error on RUN command.
118 Can't distinquish between REnum and RUn commands.
119 Missing program name.
120 Unable to create process.
121 Missing secondary entry point after comma.
122 Expecting parameter after semi-colon.
123 Illegal RUN parameter.
124 Can't activate process.
D- 240
Error Message