HP 3000 Manual page 262

new I/O specifications, the data is not stored in the correct buffer locations.
NOTE
If you change the sequence numbers of a form's fields, regenerate I/O specifications
and recompile the program. (See "Generating I/O Specifications.")
Position Cursor
Legal values for this field are Y, N, and 01-99.
The Position Cursor attribute positions the cursor at a specific input field when a form is first displayed.
If Y (yes) is specified, the cursor appears at the first position in this field, unless another field in the same
form has an indicator specified for Position Cursor and the indicator is on. If so, the cursor appears at the
first position of the first field whose indicator is on. Specify Y for only one field in a form. A Y in any
following field has no effect.
If N (no) is specified, the cursor will not appear in this field unless it is the first unprotected field in the
form, no other field uses a Y in the Position Cursor field, and no other field has an indicator that is
specified for Position Cursor. If more than one field in a form has indicators specified in this entry, and the
indicators are on when the form is displayed, the cursor appears in the first field whose indicator is on.
Protect Field
Legal values for this field are Y, N, and 01-99.
If Y is specified, or the field uses an indicator and the indicator is on, the user cannot enter data in the
input field (the field is protected). If N is specified, or a field indicator is used and it is off, the user can
enter data.
High Intense
Legal values for this field are Y, N, and 01-99.
If Y (yes) is specified, the field is displayed with high intensity. If N (no) is specified, the field is displayed
with normal intensity. If an indicator is specified, the field is displayed with high intensity when the
indicator is on.
Blink Field
Legal values for this field are Y, N, and 01-99.
If Y (yes) is specified, the field blinks; if N (no) is specified, the field does not blink. If an indicator is
specified, the field blinks when the indicator is on.
Security Video
Legal values for this field are Y, N, and 01-99.
If Y (yes) is specified, the field is a nondisplay field. Information stored in the field is not echoed to the
screen when the form is displayed or when the user enters information into the field. If N (no) is specified,
the information in the field is displayed. If an indicator is specified, the field is a nondisplay field when the
indicator is on.
NOTE
If security video is specified with high intensity, inverse video, or underline, these at-
tributes are ignored. On a terminal that does not support security video, RSI selects
the alternate character set for unprotected input fields.
Inverse Video
Legal values for this field are Y, N, and 01-99.
2- 264