HP 3000 Manual page 278
Mpe/ix computer systems, rpg/xl utilities
Hide thumbs
Also See for 3000:
- Limited warranty (17 pages) ,
- Diagnostic manual (10 pages) ,
- Installation manual (39 pages)
Advertisement
9
Press f7 (FORM UTIL).
10 Press f1 (HELP AREAS).
11 Enter forms file name if forms file name displayed on screen is not correct.
12 Enter form name which help form is to be attached to and press f2 (CREATE AREAS).
13 Move cursor to the upper left corner of help area and press f1 (UPPER LEFT).
14 Move cursor to the lower right corner of the help area and press f2 (LOWER RIGHT).
15 Press f3 (HELP ATTR).
16 Enter name of help form created earlier that corresponds with the help area you have just created
and press ENTER .
17 To create additional help areas, go back to step 12. If you are finished creating help areas on this
form, continue with the next step.
18 Press f8 (HELP MENU).
19 Press f8 (UTIL MENU).
20 Press f8 (EXIT FORM UTIL).
21 Press f8 (EXIT).
Copying a Field
1
From the main menu, press f1 (SELECT FRMS FIL).
2
Enter a valid forms filename and press ENTER .
3
Enter a valid form name and press f1 .
4
Press f8 to switch menus.
5
Position the cursor in the field to be copied.
6
Press the f1 key (HOLD FIELD).
7
Position the cursor where the field should be reproduced.
8
Press the f5 key (PLACE HOLD).
9
Press ENTER .
10 Press ENTER to save the form, or press f7 to abandon changes.
11 Press f8 (MAIN MENU) to return to the main menu.
Copying a Form Between Forms Files
1
From the main menu, press f1 (SELECT FRMS FIL) to open a forms file.
2
Enter a valid forms filename and press ENTER .
3
Press f7 (FORM UTILS).
4
Press f1 (COPY FORM).
5
Enter the names of the form and forms file using the tab key to move from field to field.
6
Press ENTER to copy the form.
7
Press f8 to return to the form utilities menu.
8
Press f8 to return to the edit main menu.
9
Press f8 to return to the main menu.
4- 280
Advertisement
