HP 3000 Manual page 277

15 Chapter 4 A Quick Reference to
SIGEDITOR
Introduction
This chapter provides a quick guide to specific tasks of SIGEDITOR and gives step-by-step directions to
perform a task. You can use these directions without reading chapters 1 and 2.
The tasks in this chapter are:
• Adding help to an existing form.
• Copying a field.
• Copying a form between forms files.
• Creating a field in an existing form.
• Deleting a field.
• Deleting a form.
• Drawing lines on a form.
• Editing attributes of a field.
• Editing form attributes.
• Erasing lines on a form.
• Generating RPG I/O specifications.
• Lengthening a field.
• Listing forms.
• Printing form and field attributes.
• Selecting a forms file.
• Shortening a field.
NOTE
NOTE Use the cursor control keys to position the cursor when performing
tasks described in this chapter.
Adding Help to an Existing Form
1 From the main menu, press f1 (SELECT FRMS FIL).
2 Enter form file name and press ENTER .
3 Enter new help form name and press f1 (EDIT FORM).
4 Enter "Y" to create form.
5 Enter new help text and press ENTER . (Do not use RETURN or ENTER keys to move cursor
around on screen; use arrow keys.)
6 Press ENTER to save text entry.
7 Press ENTER again if form name displayed is correct. If form name is not correct, enter the cor-
rect form name and press ENTER.
8 If there is another help form to create, press f1 (EDIT FORM) and go back to step 3. If there are
no other forms to create, continue to step 9.
the
4- 279